The Galleria Ceiling is composed of eight (8) LED planes spanning West to East, with Gate 1 being the centerpoint.
The West side is composed of four (4) planes, and another four (4) planes on the East side.
The resolution, pixel x/y location and physical size of each plane as follows:
West 1 – 1280x1280 x=0, y=0 [5000mm x 5000mm]
West 2 – 1280x2304 x=0, y=1280 [5000mm x 9000mm]
West 3 – 1280x2304 x=0, y=3584 [5000mm x 9000mm]
West 4 – 1280x768 x=0, y=5888 [5000mm x 3000mm]
East 1 – 1280x768 x=0, y=6656 [5000mm x 3000mm]
East 2 – 1280x1280 x=0, y=7424 [5000mm x 5000mm]
East 3 – 1280x2304 x=0, y=8704 [5000mm x 9000mm]
East 4 – 1280x2304 x=0, y=11008 [5000mm x 9000mm]
Content must be built and rendered as a single 1280x13312 file that includes all planes.
Content must then be rotated 90 degrees counter clockwise and rendered as the final file
Total physical size is 5000mm x 26000mm for the West side, and 5000mm x 26000mm for the East side.
Grand total physical size is 5000mm x 52000mm
DESIGN:
1. For ceiling graphics that have separate content on eachface
West 1 - normal
West 2 - rotate180 degrees
West 3 - normal
West 4 - rotate180 degrees
East 1 - normal
East 2 - rotate180 degrees
East 3 - normal
East 4 - rotate180 degrees
2. Forceiling graphics that have continuous content East and West
West 1 -normal
West 2 -normal
West 3 -normal
West 4 -normal
East 1 -rotate180 degrees
East 2 -rotate180 degrees
East 3 -rotate180 degrees
East 4 -rotate180 degrees
Best practices:
1. Keep ceilinggraphics to atmospheric imagery, photographic or design elements when you can
2. Refrain fromlogos and copy if possible as all the other boards will be carrying thesemessages
3. Iflogos/copy are necessary keep to orientation 1 so that they are consistent withall other boards for readability, if possible use on boards 1/4 as they are atthe best angles for copy and legibility
4. As files areonly 10 seconds long do not move something from one end to the other in thattime frame as it will too fast and jagger
SPEC:
The Galleria Ceiling is composed of eight (8) LED planes spanning West to East, with Gate 1 being the centerpoint.
The West side is composed of four (4) planes, and another four (4) planes on the East side.
The resolution, pixel x/y location and physical size of each plane as follows:
West 1 – 1280x1280 x=0, y=0 [5000mm x 5000mm]
West 2 – 1280x2304 x=0, y=1280 [5000mm x 9000mm]
West 3 – 1280x2304 x=0, y=3584 [5000mm x 9000mm]
West 4 – 1280x768 x=0, y=5888 [5000mm x 3000mm]
East 1 – 1280x768 x=0, y=6656 [5000mm x 3000mm]
East 2 – 1280x1280 x=0, y=7424 [5000mm x 5000mm]
East 3 – 1280x2304 x=0, y=8704 [5000mm x 9000mm]
East 4 – 1280x2304 x=0, y=11008 [5000mm x 9000mm]
Content must be built as a single 1280x13312 file that includes all planes.
Content must then be rotated 90 degrees counter clockwise and rendered as the final file
Total physical size is 5000mm x 26000mm for the West side, and 5000mm x 26000mm for the East side.
Grand total physical size is 5000mm x 52000mm
DESIGN:
1. Forceiling graphics that have separate content on each face
West 1 -rotate180 degrees
West 2 -normal
West 3 -rotate180 degrees
West 4 -normal
East 1 -rotate180 degrees
East 2 -normal
East 3 -rotate180 degrees
East 4 -normal
2. Forceiling graphics that have continuous content East and West
West 1 -normal
West 2 -normal
West 3 -normal
West 4 -normal
East 1 -rotate180 degrees
East 2 -rotate180 degrees
East 3 -rotate180 degrees
East 4 -rotate180 degrees
Best practices:
1. Keep ceilinggraphics to atmospheric imagery, photographic or design elements when you can
2. Refrain fromlogos and copy if possible as all the other boards will be carrying thesemessages
3. Iflogos/copy are necessary keep to orientation 1 so that they are consistent withall other boards for readability, if possible use on boards 1/4 as they are atthe best angles for copy and legibility
4. As files areonly 10 seconds long do not move something from one end to the other in thattime frame as it will too fast and jagger
